I-Beams/H-Beams    JIS G3101 SS400
Universal Beams/Columns    EN 10025 S275JR | S355JR | ASTM A 572 GR.50

Comparison:
– H-Beam has wider Flanges than I-Beam
– I-Beam has thinner Web than H-Beam

(Optimal Beam selection is subject to its application requirements)

A beam is a horizontal structural element that is capable of withstanding load primarily by resisting bending.

Both H & I Beams are widely used in the construction industry to provide support for buildings and load-bearing walls. They are available in a variety of standard sizes and selected based on the applied load for the required application. I-beams may be used both as beams and as columns.

[gravityform id=”1″ title=”true” description=”true”]

1. Hot Rolled Steel Plates  

Thickness: 02mm – 20mm
Width: 1219mm – 2000mm
Length: 2438mm – 12000mm

Specifications: ASTM A36 / EN10025 S275JR, S355J2G3 / A709 GR-36.50.50W / A242 / A283 GR-A~D / A285A~C / A515 GR-60.65.70 / A516 GR-55.60.65.70 / A537 CLASS-1 / A572 GR-42.50.60.65 / A573 GR-65.70 / A588 / A 841-C1.2

---

2. Hot Rolled Steel Sheets & Coils  

Thickness: 1.0 mm to 25 mm
Width: 1220 mm to 2000 mm
Length: 2440 mm to 12000 mm

Specifications: Hot Rolled Sheet Confirming to ASTM A36, EN10025 S275JR, S355J2G3, ST – 37 /2, ST 44, S235JR, S275JR, S355JR, Grade 50

---

3. Hot Rolled Chequered Coils/Sheets/Plates

Thickness: 3mm – 10mm
Width: 1219mm-1500mm
Length: 2438mm-12000mm

Specifications: ASTM A36 / EN 10025 S275JR / A 283 C / A572 GR 50 / SA516 GR 70 / ST 37-2 / ST 44-2 / ST 52-3 / DIN 1.0345 H1, S275 JR / S235 JR

---

4. Cold Rolled Steel Plates (JIS SPCC/ASTM A-366/ASTM A 569)

Thickness: 0.35 mm – 3 mm
Width: 900 mm – 1,250 mm
Length: 2,438 mm

---

5. Cold Rolled Steel Coils / Sheets (JIS SPCC /ASTM A-366/ASTM A 569)

JIS G3141 [SPCC-SD, SPCD-SD, SPCEN-SD] | EN 10130 [DC01, DC02, DC03, DC04] | DIN 1623 [St 12,St 13,St 14] | ASTM A 1008

Quality: Full hard (CRFH) or Soft Annealed (CRCA)
Thickness: .20 mm to 1.5 mm
Width: 400mm – 1550mm
Coil Wt. 5 – 15 MT Approximately

[gravityform id=”1″ title=”true” description=”true”]

(ASTM A416) Low Relaxation Pre-stressed Concrete Stranded Wire

Specification: Grades available as per ASTM- 416, BS 5896 & EN 10138-3 and the common

Sizes: 9.53mm / 12.7mm / 15.24mm

Packaging: in cheese coils from 1 to 4 MT based on the customer requirement. These coils are suitably strapped for compactness and are palletized (Eye to Side or Eye to Sky)

[gravityform id=”1″ title=”true” description=”true”]

1. Hot Rolled Plain in Coils (SAE 1006, 1008, 1010, 1018 & as per AISI)

Bundles of: 1.5 – 2 – 2.1 MT Approx.
Diameters: 5.5 – 6 – 7 – 9 – 11 – 12 – 16mm ID 850mm and OD 1225mm

2. Cold Drawn Rebar In Coils (BS4483)

Diameters: 6mm – 12mm

3. Rebar in Coils (BS4449: 1997, Gr. 460B / BS4449: 2005 Gr. B 500B / ASTM A615 Gr.60)

Diameters: 8, 10, 12, 14, 16mm

[gravityform id=”1″ title=”true” description=”true”]

Steel Welded Pile Cages

After observing the traditional methods used onsite for manual wire tied joints we came to a conclusion that it’s definitely less effective, costly and requires labors.

Diameters range:
450 mm to 1950 mm and are made of steel reinforcement bars of mixed sizes.

Length:
4.8 mtr

Width:
2.4 mtr

[gravityform id=”1″ title=”true” description=”true”]

BS4466: 1989 / BS8666: 2000 by using AutoCAD and other Detailing Softwares

Rebar Cut & Bend, Stirups Diameters: 8mm–32 mm & 8mm-12mm.

Steel Stirrup Rings Diameters: 25cm made of 8mm–20mm diameter steel reinforcement bars.

[gravityform id=”1″ title=”true” description=”true”]

BS4483: 1998 / 2005
Welded Fabric – Reinforcement Mesh

Diameters:
A98    A142    A193    A252    A393    A565
5 mm    6 mm    7 mm    8 mm    10 mm    12 mm

Sizes:
Standard size: 200mmx200mmx2.4mtrx4.8mtr (A98 – A565 Diameters – Thickness of the Wire Mesh)
Single piece/sheet of Steel Welded Wire Mesh: 11.52 Sq Mtr Area (2.4mx4.8m)

Spacing: 200 mm X 200 mm
Length: 4.8 mtr
Width: 2.4 mtr

[gravityform id=”1″ title=”true” description=”true”]

1. Hot Drawn – Straight Deformed Steel Rebar
(BS4449: 1997, 2005 Gr.460A, B / 500B)

(Carbon Steel Bars for the Reinforcement of Concrete)

Diameters: 8mm–40 mm,
Length: 12 mtr

2. Cold Drawn – Ribbed Straight Deformed Rebar
(BS4482: 1998  / 2005)

(Cold reduced Wire for the Rei forcement of Concrete)

Diameters: 6mm–12 mm,
Length: 6–12 mtr

3. M.S. Mild Steel Plain – Round Bars (BS4482)

Diameters: 5.5mm–12 mm,
Length: 3–12 mtr (straight bars and coils)

 

[gravityform id=”1″ title=”true” description=”true”]